|
|
Rank: Captain
Joined: 4/30/2007
Posts: 633
Location: Graham
|
I don't use those.
What weight is your leader and main line?
I am thinking that the leader is really light compared to the main line and weight, so that when casting the weight heads out first and the leader and hook stay behind the weight. tangling in the mainline.
Maybe it is also the speed of your cast? Do you have a baitcasting reel or spinning?
Those are the only things I can think of right now. I can not remember it ever happening to me.
Quote:go down to the lake, cast a hook, and pull in the first fish that bites. Open its mouth and you'll find a coin.
|
|
Rank: Commander
Joined: 5/6/2008
Posts: 312
Location: Auburn
|
Toni wrote:
I know makes no sense at all. I have caught more off these corkies than eggs, so far in my career.
This is your job? Where do I apply? This is all good info, looks like I'll be river fishing soon since I probably wont be able to get my boat into Tapps before next spring.
|
|
Rank: Captain
Joined: 4/30/2007
Posts: 633
Location: Graham
|
RaMcVey wrote:Toni wrote:
I know makes no sense at all. I have caught more off these corkies than eggs, so far in my career.
This is your job? Where do I apply? This is all good info, looks like I'll be river fishing soon since I probably wont be able to get my boat into Tapps before next spring. Maybe it comes easy for you but I work hard to catch salmon. Work hard=career.
ca·reer (k-rîr) A chosen pursuit
Quote:go down to the lake, cast a hook, and pull in the first fish that bites. Open its mouth and you'll find a coin.
|
|
Rank: Member
Joined: 3/5/2008
Posts: 10
Location: seattle
|
I heard corky and yarn setups are effective because the line flosses through the fishes mouth. The yarn sticks to the teeth or slides through the gill plates this is when you feel the fish. When you set the hook your basically just snaggin it in the mouth or outside of the mouth. The fish is not actually biting at the corky and yarn. I've noticed that anglers that use light pound test line and a longer leader seem to be more effective so it would make sense to me this is what is happening. Does anyone know if this is true or not?
|
|
Rank: Commander
Joined: 6/27/2007
Posts: 545
Location: kent Wa
|
Toni wrote:RaMcVey wrote:Toni wrote:
I know makes no sense at all. I have caught more off these corkies than eggs, so far in my career.
This is your job? Where do I apply? This is all good info, looks like I'll be river fishing soon since I probably wont be able to get my boat into Tapps before next spring. Maybe it comes easy for you but I work hard to catch salmon. Work hard=career.
ca·reer (k-rîr) A chosen pursuit I agree I would say I usually cover anywhere from 2+ miles each time I fish for salmon/steelhead. Last coho I caught took me about 4 mile of walking round trip.
My Fishing Pic's http://s221.photobucket.com/albums/dd102/derrick_k/?albumview=grid
|
|
Rank: Rear Admiral *
Joined: 4/29/2007
Posts: 180
Location: Area 9
|
matador wrote:I heard corky and yarn setups are effective because the line flosses through the fishes mouth. The yarn sticks to the teeth or slides through the gill plates this is when you feel the fish. When you set the hook your basically just snaggin it in the mouth or outside of the mouth. The fish is not actually biting at the corky and yarn. I've noticed that anglers that use light pound test line and a longer leader seem to be more effective so it would make sense to me this is what is happening. Does anyone know if this is true or not?
Fish (salmon/steelhead) will take corky and yarn, especially with some sandshrimp/eggs on em.......But yes, many folks lengthen their leader and get rid of the corky and fish yarn, and this technique is called flossing. If you see people flinging long leaders (5+ feet) and ripping them through shallow riffles, they are flossing....
Salmon......
|
|
Rank: Lieutenant
Joined: 6/28/2007
Posts: 207
Location: Kent
|
Toni wrote:I don't use those.
What weight is your leader and main line?
I am thinking that the leader is really light compared to the main line and weight, so that when casting the weight heads out first and the leader and hook stay behind the weight. tangling in the mainline.
Maybe it is also the speed of your cast? Do you have a baitcasting reel or spinning?
Those are the only things I can think of right now. I can not remember it ever happening to me. I'm using 6# Trilene 100% FC on main and leader. My partner is using 8#. We're both on spinning gear. Leader is roughly 2 ft long. I didnt know exactly what to buy. So I bought these premade ones thinking it would be easier.... 
|
|
Rank: Captain
Joined: 4/30/2007
Posts: 633
Location: Graham
|
I haven't ever used FC before but the weight might be to much. I use 3/16 solid core pencil lead but at about 1-1 1/2 inches. The picture of the swivel you were using says for 1/4 lead.
It really depends on the flow of the river. How fast the current is.
Try using 3/4 inch piece of lead and see if that takes care of the problem.
What river did you fish?
Quote:go down to the lake, cast a hook, and pull in the first fish that bites. Open its mouth and you'll find a coin.
|
|
Rank: Lieutenant
Joined: 6/28/2007
Posts: 207
Location: Kent
|
Toni wrote:I haven't ever used FC before but the weight might be to much. I use 3/16 solid core pencil lead but at about 1-1 1/2 inches. The picture of the swivel you were using says for 1/4 lead.
It really depends on the flow of the river. How fast the current is.
Try using 3/4 inch piece of lead and see if that takes care of the problem.
What river did you fish? We've tried the Green, just north of the 277th bridge. We also tried the Puyallup, but i think it's actually the Carbon at where we were. We went all the way out to Orting I believe. Not the bridge by the gun club. But the bridge just south of that. I think on 128th? Anyways, were were out on the rock bed walking north from the bridge. Tried all up and down that area with spinners and a bit of cork/yarn. No luck. We saw a HUGE dead carcass in the water. Dont know what kind of fish it was. We did hear 1 large slash, but other than that. Nothing. Didnt see any. Water too cloudy. Since the Green is now open higher up, we're going to attempt the Flaming Gyser area if the weather is decent later on.
|
|
Rank: Captain
Joined: 4/30/2007
Posts: 633
Location: Graham
|
It does sound like you might be using a little too much weight.
You were on the Puyallup. The Carbon's mouth is a mile or 2 south of were you were.
Quote:go down to the lake, cast a hook, and pull in the first fish that bites. Open its mouth and you'll find a coin.
|
|
Rank: Lieutenant
Joined: 6/28/2007
Posts: 207
Location: Kent
|
Toni wrote:It does sound like you might be using a little too much weight.
You were on the Puyallup. The Carbon's mouth is a mile or 2 south of were you were. Hmmm, I think we were there also. After we got done fishing. Since we were just in the area. We decided to just drive around and see what else is out there. Headed South, or maybe it's SE on what I believe is Highway 162. We pulled over at this bridge. It's a park or something. Walked under the bridge and got to the river just to look around. A little bit to the left, there's 2 rivers flowing into one. That must be it.
|
|
Rank: Captain
Joined: 4/30/2007
Posts: 633
Location: Graham
|
FishingFool wrote:Toni wrote:It does sound like you might be using a little too much weight.
You were on the Puyallup. The Carbon's mouth is a mile or 2 south of were you were. Hmmm, I think we were there also. After we got done fishing. Since we were just in the area. We decided to just drive around and see what else is out there. Headed South, or maybe it's SE on what I believe is Highway 162. We pulled over at this bridge. It's a park or something. Walked under the bridge and got to the river just to look around. A little bit to the left, there's 2 rivers flowing into one. That must be it. That is it!
You did mean a little bit of parking area?
Oh ya, that is just the Carbon entering the Puyallup. You were still on the (little) Puyallup.
Quote:go down to the lake, cast a hook, and pull in the first fish that bites. Open its mouth and you'll find a coin.
|
|
Rank: Commander
Joined: 5/8/2007
Posts: 599
Location: Carkeek Park, North Seattle
|
FishingFool wrote: And I didnt even bother asking the kids at Joe's. Good grief.... I just got back from Joe's. I knew better the whole time driving there, to just say no and do it. Then when I get there, there is 1 guy working in the fishing section.... but he doesn't fish!! Never again. 
Webshots Photo Album http://community.webshots.com/user/quadradomus
|
|
Rank: Commander
Joined: 5/8/2007
Posts: 599
Location: Carkeek Park, North Seattle
|
I am going out to do my first drift fishing on a river pretty much, on Monday. Going to the Green river. I've read this corky thread pretty closley, and it is an excellent thread and helpful. But I did not see any info. as far as what color corkies to use?? Can someone be specific as to the size for this time of year also. Thank much.
Webshots Photo Album http://community.webshots.com/user/quadradomus
|
|
Rank: Lieutenant
Joined: 3/1/2008
Posts: 218
Location: Hoquiam, WA
|
Hot pink, green or chartruese. they only have to be big enough to float your hook 
|
|
Rank: Captain
Joined: 4/30/2007
Posts: 633
Location: Graham
|
I only use the 2 smallest sizes for corkies. I do believe that each river and each fish like it different. I went to the Puyallup yesterday and hooked a mess of gear. Most had orange corkies.
I have heard that green works for chums. I haven't caught one so I don't know. I have heard red works for silvers. I have caught mine on pink this year (beginning of Sept.).
If the water is cloudy go with the larger size or use 2 small ones.
The Green has winter steelhead - try cerise and hot pink.
Quote:go down to the lake, cast a hook, and pull in the first fish that bites. Open its mouth and you'll find a coin.
|
|
Rank: Lieutenant
Joined: 11/25/2008
Posts: 218
Location: Pressing =Pacific Northwest holywaters/Alaska, BC
|
Corkies and yarn= 500 strong pre loaded 44 pips locked and loaded and zero lead bangs and hangs, (slinkies) much more forgiving and rig them slinky first on your main line, then a bead, tie off to barrel swivel then your leader and set up to the other end of your barrel swivel .  The (no snag)  weights posted also sweet as well rubber coated zero noise and bottom tip bounce indicator we use them often
swedefish4life1 attached the following image(s):
Press all waters from Idaho to Alaska/BC/New Zeland Boat design, Boat work bench set ups to catch more fish, products rating and all terminal gear Your River, bay, lakes and open ocean specialist
|
|
|
Guest |